building-your-dream-home
Home builder's guide

Expert Tips for Building
Your Dream Home

Before design and looks comes structure. Here's what to check at every stage, from the plot to the plaster, so your home lasts for years.

See the structure

Pick the right plot

Your choice of plot shapes the whole structure. Tick each point as you check it. Your ticks stay on this device.

The structure, part by part

From the ground up, each part rests on the one before it, and passes its load down to firm ground. Tap a part to jump to its tips.

  1. 1FoundationPasses the load into firm soil or rock
  2. 2PlinthSeparates above ground from below
  3. 3ColumnSpreads the building's weight evenly
  4. 4BeamCarries load to columns and walls
  5. 5SlabForms the floors and roof
  6. 6WallsEnclose and divide the space

The foundation

The foundation transfers the building's load to firm soil or rock.

  1. 1Consult a qualified engineer

    They decide the right type and depth of foundation for your soil.

  2. 2Dig random trial pits

    This shows the real quality of the soil. It's a vital step.

Don't skip the trial pits. Without them you risk a foundation that's too shallow or sits on loose soil, which can be dangerous over time.

The plinth

The plinth separates the structure above ground from the part below, and holds the compacted soil fill in place.

  • Build the plinth higher than the road next to it, so rainwater stays out.
  • Waterproof it well. Moisture rising by capillary action causes cracks, uneven floors and loose tiles.

The column

Columns hold the structure up and spread its weight evenly.

Check four things

Layout and centreReinforcementShutteringConcrete quality
True to plumbAlign each column and cast it perfectly vertical, so weight spreads evenly and cracks don't form.

Get it right first time. Damage to even one column puts the whole structure at risk. Once cast, a column shouldn't need repair.

The beam

Beams carry loads along their length to their end points: walls, columns and foundations.

Level

Beams must be perfectly horizontal, with no sag.

Steel joints

Bars joining columns to beams, and slabs to beams, need proper overlaps and anchorage.

Heavy rain areas

Cast beams up to lintel level to keep rainwater out.

The slab

Aim for a surface that's durable and needs little maintenance.

Clear the base

Remove plants, soft soil and rocks so the slab is evenly supported.

Keep it even

Use a gauge while casting so the thickness stays the same throughout.

Waterproof toilets

Treat toilet areas thoroughly.

The walls

Strong walls start with strong bricks. Stagger the joints and avoid continuous vertical joints, which lead to cracks.

1 metre a dayMaximum wall height to build per day. Length can be any.

Plan concealed plumbing and electrical pipes before you build, so walls don't get damaged later.

Test the bricks first · hover or tap for how

A professional contractor should run these tests before construction starts.

Lighter inner walls. Cellular Lightweight Concrete (CLC) blocks, often called Cipralex blocks, cut the weight of internal walls. They're bigger than red bricks, so they save time and money.

Have questions about which cement product to start with?

Reach out to the JSW Cement team before you start.

Contact JSW Cement

Curing, plastering and lighting

Three steps that are crucial to finishing your home the right way.

Curing

Curing keeps concrete moist so it hardens and reaches full strength. It matters most for surfaces exposed to the weather.

Plastering

Protects exposed surfaces and masonry joints from the weather, and binds bricks and stones together for a more stable wall.

15–20 mmMinimum plaster thickness. Plaster needs curing too.

Lighting

Plan wiring and lights around how each space will be used, and aim for even light across the room.

  • Don't just follow trends.
  • Put the main lights on the ceiling, not the walls, to cut shadows.
  • Add statement wall lights separately.

Build it strong from the ground up

Get the plot, the frame and the finish right, and your dream home will stand for years. Choose materials you can trust.