Understanding-Different-Components-of-Construction
Home builder's guide

Understanding the components
of construction

Site, walls, roof, fixtures and finishes.
Know each part of your home before work begins.

Jump to architecture

Know your home, part by part

A new house should be as strong as it is good-looking. Every house differs in size, shape and design, so learn its parts before construction starts.

More than building

Understand what goes into each part of the house, from roof to countertop.

Get a professional

You can be your own contractor, but an expert knows the design and build in detail and can advise on materials, designs and tools.

Two parts

This guide covers construction first, then architecture.

Part 1 · Construction

Prepare the site

Building changes the land around it, so permits come first. The local governing body also approves the house design.

Permits to get

ZoningGradingSeptic systemDrainage connection
  1. 1Clear and level

    Remove unwanted trees, debris and rocks, then level the ground.

  2. 2Bring in a surveyor

    They check the blueprint and boundaries and can suggest changes for how water flows across the site.

  3. 3Set up power

    An electrician arranges a temporary supply for the site.

  4. 4Dig for the foundation

    Holes and trenches go in for pillars, a basement and similar parts. Dig a well now if you plan one.

  5. 5Fill and wait

    Holes and trenches are filled with concrete. Work stops until it sets.

Look after the crew. The work is long and hard. Provide drinking water and toilets on site.

Plumbing and HVAC go in early

On a slab foundation, plumbers and electricians fit the key services before the concrete is poured.

  • Wiring
  • Pipes and sewer lines
  • HVAC vents and ductwork
  • Water supply lines
  • Shower and bath units

Walls and roof

Walls and roof form the main structure. They need to be strong as well as good-looking.

Once the foundation services are in, the walls and ceilings go up. Wiring and plumbing can run inside them at the same time.

"Dried in"What builders call the house once the roof is complete.

Next, electricians fit sockets, lights and switchboards and connect them to the mains. Cable TV, phone and home theatre wiring go in too.

Tips for strong walls

  • Lay bricks and blocks on a full bed of mortar.
  • Fill every joint and gap with mortar.
  • Keep brickwork even and tightly packed for stability.
  • Plaster well for smooth surfaces inside and out.

Insulation and waterproofing

One keeps the temperature steady. The other keeps water out.

Insulation

Keeps indoor temperature steady, so air conditioners and heaters work well and the home uses less energy.

It is rated by R-value, which measures how fast heat passes through. The right type depends on your region and climate.

FibreglassMineral woolConcrete blocksCelluloseFoam

Waterproofing

Protects against moisture. Skip it and water can seep into walls and roofs, which is costly to fix.

Standing water can corrode the metal frame and put the whole structure at risk.

BasementsTerracesKitchensBathrooms

Paint, texture and fixtures

With insulation and waterproofing done, the walls and roof get their final finish, also called wall priming.

Texture and paint

Choose a custom wall texture and colour now. You can do it yourself to save money, but a large house needs professional painters.

Doors and windows

Pick by size, shape and material. Options include double doors, sliding doors, grilled windows and glass panes.

Countertops

Specialists design and fit them.

Kitchen and bath

Specialists then supply cabinets, showers, toilet seats, sinks, taps and similar fittings.

Have questions about which cement product to start with?

Reach out to the JSW Cement team before you start.

Contact JSW Cement

Flooring and clean-up

A hard floor surface gives stability and supports good landscaping.

Flooring options

  • Hardwood
  • Marble
  • Carpet
  • Ceramic tiles
  • Luxury vinyl plank
  • Ceramic and marble also suit countertops

Clear the debris. Leftover rubble breeds insects and bacteria, encourages mould and leaves scrap metal hazards. A professional cleaning agency can clear the site quickly.

Part 2 · Architecture

Roofing

Construction builds the structure. Architecture plans how it looks. The roof shields the home from rain, snow and sun, so choose durable materials.

Common materials

WoodMetalAsphaltSlateTiles

How HVAC ducts and wiring are layered under the roof can affect which material suits.

  • Ventilation keeps air moving. Poor airflow wastes energy and causes ice dams.
  • Vent types: soffit, ridge and gable vents.

Leak-prone spots

Valleys, where two roof slopes meet, and joins with vents, chimneys and pipes take the most water.

Waterproofing

Underlayments and drip edges keep water out.

Re-roofing

Strip the old covering and fit the new one. Starting from the sheathing clears out any rot or damage in the layers.

Upkeep

Premium materials like asphalt shingles often come with a warranty. Still maintain the roof, and fix storm damage, ageing and poor installation quickly.

Doors and windows

Interior fixtures shape how the house looks and feels, so design and fit them properly.

Window styles

Double-hung

Two sashes that slide up and down.

Casement

Hinged at the side, opening outward.

Sliding

Panels that glide sideways on a track.

Window materials

Choose both frame and glass. Common frames are vinyl, aluminium, fibreglass, composites and wood. Energy-efficient, high-performance windows are now available for modern homes.

Doors

Choose the material, colour and hinges, then a twist handle or a doorknob. Hardwood such as oak and unbreakable glass stand out.

Tiles and countertops

Both add a lot to the look of a home, and both need the right material.

Tiles

Even, uniform tiling lifts the look of the whole home. Tiles now come in many shapes, sizes, designs and textures, not just 6×6 squares.

Porcelain tiles with decorative motifs give walls a luxurious feel.

  • Clean grout and stains regularly.
  • Replace broken or damaged tiles.

Countertops

Kitchen countertops are the most common. They come in many materials and designs, and must be durable and resist stains and cracks.

A countertop specialist can advise on material and fitting.

GraniteMarbleStainless steel

Granite and marble are the most popular for their timeless look. Stainless steel suits modern designs.

Why hire a professional contractor

Building a home is daunting. Knowing the basics helps, but no homeowner can manage every task alone.

A team of experts

Skilled people who follow the best building practices.

A set schedule

Planned, step-by-step work saves a lot of time.

Answers anytime

Clear up any doubt with your contractor whenever it comes up.

Designing a home is exciting, and challenging

Next up: bathroom architecture, with a step-by-step guide to bathroom fixtures and how to fit them.