Waterproofing
SMARTBLOK PU 2K INJECT GROUT
DESCRIPTION
POLYURETHANE INJECTION GROUT AS A RESIN FOR THE ELASTIC SEALING OF CRACKS IN CONCRETE STRUCTURES
SmartBlok PU 2K INJECT GROUT is a two component solvent free, polyurethane system consisting of a resin component (SmartBlok PU 2k Inject Grout) and a special type of isocyanate (SmartBlok PU 2K Inject Grout)
This system is ideally suitable for the elastic sealing of cracks in concrete surfaces as well as areas suffering from water leakage problems.
The use of SmartBlok PU 2K Inject Grout as such is depending on the amount of water expected. In case the crack is dry or moist, the resin can be used directly into the crack.
FEATURES
Repair concete cracks for water-stop
Deeper penetration
Low VOC content
Reduced Odor
PACK SIZE:
16 kgs pack (10kgs part A and 6kgs Part B)6 BENEFITS
- Low viscosity significantly helping in deep penetration in tiny cracks
- Can be easily drilled and injected
- Flexible resin to withstand crack movements
- Permanent solution to water seepage
- Non-destructive water stoppage
- Eco-friendly
TECHNICAL SPECIFICATIONS
| Property | Part A | Part B |
|---|---|---|
| Colour | Yellowish | Dark Brown |
| Density (g/cc) | 1.040 ± 0.02 | 1.220 ± 0.02 |
| Mixed Viscosity of the mixture at 300C mPas | 250 - 600 cps | 250 - 600 cps |
| Mixing Ratio by volume | 2 | 1 |
| Potlife at 200C(minutes) | 150 minutes | 150 minutes |
| Shore Hardness | 40 A | 40 A |
| Mixed Density(g/cc) | 1.078 | 1.078 |
